An industrial parts cleaner can only perform if it fits the process it is placed into. That is why we evaluate the current setup before making a recommendation. We need to understand what happens in your cleaning process before we can clean things up.

A process review looks at the real operating conditions: temperature, chemistry, bath life, wastewater, energy consumption, dosing, maintenance, the industrial parts washer, and the required cleaning quality.

This gives us a clearer picture of where improvements can be made. Sometimes the issue is the chemistry. Sometimes it is the bath condition. Sometimes the temperature is too high because that is how it has always been done. Sometimes the industrial parts washer needs attention before any new cleaner can perform properly.

And sometimes the biggest savings are hidden in places where no one has looked for years.

For many production teams, the cleaning process is a critical yet overlooked part of the total operation. If it becomes unstable, it can lead to rejected parts, rework, higher energy use, shorter bath life and unnecessary downtime. That is why we do not look at the cleaner in isolation. No, we look at how the full process performs. 

This is where Pure Performance makes a difference. It moves the conversation from product price to process value. From “what does the cleaner cost?” to “what does the cleaning process cost us?”

That is a much better question. If you ask us.

Testing is where the recommendation becomes specific. The purpose is to find the water-based industrial cleaning solution that fits the application, the contamination, the equipment and the quality requirements.

To do that, we test your reality as closely as possible. We look at the parts, the oil or emulsion, the available equipment, and the result you need to achieve.

Sounds geeky? It is. Luckily, our chemists like it that way.

We look for cleaning performance, process stability, bath lifetime, lower operating temperature and reduced resource use. The right industrial parts cleaner must work with the existing process, not against it.

This matters for TCO. The product price alone rarely tells the full story. Energy use, wastewater, downtime, maintenance and product consumption often have a much bigger impact on the final cost per cleaned part.

A test also reduces uncertainty.

Before a new industrial cleaning solution is introduced into production, both you and we need to know what to expect. 

• Will it clean the parts?
• Can it work at a lower temperature? 
• How does it handle the contamination? 
• Does it support longer bath life? 
• Will it make the process easier to control?

That is what testing helps us answer.

You’ll always receive a Product Selector Report when our Tech Lab has been analysing which products fit your operation.

And if we do not have the right product? Then our lab has work to do.

That is the beauty of having our own chemists and test facilities. We do not have to force a standard product into a process where it does not belong. We can adapt, test and develop when the challenge requires it.

When the test is done properly, the recommendation becomes more than a product suggestion.

It becomes a documented step towards a more reliable industrial cleaning solution.

Experience our lab in action

Changing cleaning chemistry can affect production. That is why the conversion to a new industrial cleaning solution must be managed.

We do not send a product and wish you good luck. Our technicians are present during switchover to help ensure the machine is ready, the bath is prepared correctly, and the new process starts under the right conditions.

Because even the best cleaner can underperform if the machine is not ready for it. These are not small details. They are exactly the kind of things that can make a good solution look bad.

So we take them seriously.

Before the new cleaner goes in, the machine may need to be cleaned, drained and checked. Nozzles, oil skimmers, dosing systems and bath conditions all matter. The process needs the right start.

Our technician adjusts the machine according to the new industrial cleaning solution and helps make sure the process is set up for optimum performance. Not later. Not when the first issue appears. From the beginning.

Pure Performance does not stop after implementation. Actually, this is where a large part of the value begins.

Industrial cleaning is not a set-and-forget operation. Production volumes change. Oils and emulsions change. Staff changes. Bath conditions drift. Equipment wears. A process that worked perfectly in January can behave differently later on in the year.

That is why we stay involved.

Through service visits, dialogue, bath maintenance and process adjustments, the industrial cleaning solution can keep improving over time.

We check the bath. We look at concentration. We assess the cleaning result. We listen to the operators. We adjust what needs adjusting.

Simple? Yes.

Important? Very.

That is why the real savings often appear six months in. Once the process is stable, fine-tuned and fully understood, the gains become clearer: lower energy use, longer bath life, fewer disruptions, better cleaning quality, and a lower TCO.

Pure Performance is not about selling an industrial parts cleaner. It is about building a cleaning process around the right industrial parts washer, the right chemistry and the right support. A process that works better, costs less to run and supports a more responsible production setup.

That is how we operate.

We ask first. We test properly. We manage the conversion. And we stay.

FAQ